The EOA3630 comes with wall mount kit and supports PoE function for quick outdoor installation. To ensure wireless security, it provides security encryption mechanisms including WEP, WPA/WPA2 and IEEE 802.1x.
This AP complies with IEEE 802.11g standard. Using "Super G" technology it provides wireless transmission speeds of up to 108Mbps. It is WDS compatible and uses WMM (QoS) to prioritize the traffic over the network.
This device can act as a DHCP client/server. It provides VPN pass-through for IPSec, L2TP and PPTP. The EOA3630 can be easily configured via Web-based configuration utility or via SNMP v.1/ v.2.
| EOA3630 Features | |
| General | |
| Availability: | currently available |
| Street price: |
$138 |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DHCP server: |
|
| DHCP client: |
|
| Routing Protocols: | VLAN tagging (802.1q) |
| Wireless | |
| Maximum Wireless Speed: | 108 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11g+ (108 Mbps+) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: | N-type |
| Transmit Power: | +22 dBm |
| Receiver Sensitivity: | -74 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
ping, traceroute |
| Misc hardware info | |
| Chipset: | Atheros AR2316, 180MHz |
| RAM: | 32 Mb |
| Flash Memory: | 8 Mb |
| SNMP support: | SNMP v.1, SNMP v.2 |
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://www.senao.com/English/Default.asp... |
| Datasheet: | http://www.senao.com/images/www.senao.co... |
| Manual: | http://www.senao.com/images/www.senao.co... |
| Quick Install Guide: | http://www.senao.com/images/www.senao.co... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|