The ENXWI-1AN45 Wireless N150 Extender complies with IEEE 802.11n, and provides faster and farther range than 802.11g while being backward compatible with 802.11g and 802.11b mode. It supports WEP, WPA, WPA2, and WPS WLAN security features.
| ENXWI-1AN45 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 5 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP server: |
|
| DHCP client: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering |
| WiFi modes: |
Access point Wireless client Repeater mode |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: | RP-SMA (Reverse SMA) |
| Antenna gain: | 5 dBi |
| Transmit Power: | +15 dBm |
| Receiver Sensitivity: | -70 dBm |
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Default IP address: | 192.168.10.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Links | |
| Product page: | http://www.encore-usa.com/us/product/ENX... |
| Datasheet: | http://www.encore-usa.com/us/sites/defau... |
| Manual: | http://file.encore-usa.com/misc/product/... |
| Quick Install Guide: | http://file.encore-usa.com/misc/product/... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|