The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

Encore ENDSLW-1AN45

details: ADSL2+ Wireless N150 Router
hardware type: DSL Wireless Router
date added: 2014-01-26
The ENDSLW-1AN45 ADSL2+ Wireless N150 Router is a highly integrated wireless Internet gateway device. It is fully compliant with ADSL2/2+, IEEE 802.3/3u and IEEE 802.11b/g/n specifications.

The router supports downstream/upstream data rates up to 24Mbps and 1Mbps for Internet access, four 10/100Mbps Fast Ethernet ports and one IEEE 802.11b/g/n maximum 150Mbps wireless Access Point for connections to PC hosts or other Fast Ethernet or wireless network devices.

The feature-rich routing and NAT functions are seamlessly integrated to this device for corporation or SOHO users.

This router comes with two detachable 5dBi antennas. The model ENDSLW-1AN42 has the same features as ENDSLW-1AN45 but features one 2dBi detachable antennas.
 
 
 
 ENDSLW-1AN45 Features
 General
 Availability: announced
 LAN / WAN Connectivity
 WAN throughput: 24 Mbps
 WAN throughput upstream: 1 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: yes
 ToS / DiffServ: yes
 UPnP: yes
 Transparent Bridging (IEEE 802.1d): yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 150 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
 external antenna(s): 1
 ext antenna(s) removable ?: yes
 Antenna gain: 2 dBi
 Transmit Power: +14 dBm
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: IP Address filtering, packet filtering
 Device Management
 Administration: Web-based (LAN)
Telnet / CLI
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Misc hardware info
 RAM: 16 Mb
 Flash Memory: 4 Mb
 SNMP support: SNMP v.1, SNMP v.2
 NTP client: yes
 Links
 Product page: http://www.encore-usa.com/us/product/END...
 Datasheet: http://www.encore-usa.com/us/sites/defau...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About