This range extender supports wireless transmission speeds of up to 300Mbps. It provides WEP and WPA/WPA2 wireless encryption.
There is no need to install any additional software and your Powerline network will be up-and-running within just a few minutes. A secure Powerline connection can be established between compatible devices with a simple touch of a WPS button, with no configuration or passwords necessary.
The HP-5102Wn supports the energy saving mode to reduce power consumption. If no data transmission or reception occurs over a certain period of time, the adapter will automatically go into standby mode to save power consumption.
| HP-5101Wn Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Powerline Networking: | HomePlug AV2 (500Mbps) |
| Router | |
| DHCP client: |
|
| QoS: |
|
| Routing Protocols: | IGMP Multicast (RFC 1112) |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: | Repeater mode |
| external antenna(s): | 2 |
| Transmit Power: | +15 dBm |
| Multiple SSID: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Misc hardware info | |
| RAM: | 8 Mb |
| Flash Memory: | 2 Mb |
| IPv6 support: |
|
| Links | |
| Product page: | http://www.edimax.com/en/produce_detail.... |
| Datasheet: | http://www.edimax.com/images/Image/datas... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|