A WPS (Wi-Fi Protected Setup) button allows the EW-7238RPD to join an existing wireless networking at the simple push of a button.
Featuring iQ Setup - Edimax's intelligent, automated setup wizard. iQ Setup automatically detects available Wi-Fi networks and helps you establish a connection and extend your Wi-Fi in just a few seconds.
This device also includes IEEE802.3az Energy Efficient Ethernet (EEE) which regulates the amount of power supplied to an Ethernet data link based on its usage - further reducing power consumption.
| EW-7238RPD Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: | Repeater mode |
| internal antenna(s): | 2 |
| WPS (Wi-Fi Protected Setup): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| Device Management | |
| Default IP address: | 192.168.9.2 |
| Alternate Admin URL: | http://edimax.setup |
| Default admin username: | admin |
| Default admin password: | 1234 |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Usage Statistics: |
|
| Links | |
| Product page: | http://www.edimax.com/edimax/merchandise... |
| Datasheet: | http://www.edimax.com/images/Image/datas... |
| Manual: | http://www.edimax.com/images/Image/manua... |
| Quick Install Guide: | http://www.edimax.com/images/Image/QIG/W... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|