The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

Edimax AR-7265WnA

details: Wireless IEEE802.11 b/g/n ADSL2/2+ Modem Router
hardware type: DSL Wireless Router
date added: 2010-05-16
updated: 2012-09-25
Edimax AR-7265WnA is a wireless ADSL2+ router with one RJ-11 WAN port and four 10/100Base-T LAN ports. It provides WAN throughput of up to 24Mbps.

This modem router complies with the 802.11n wireless standard. With the advanced MIMO technology, it provides up to 12 times better data transmission rate (up to 300Mbps) and 6 times better coverage than a standard 802.11g/b router. The AR-7265WnA uses WMM (QoS) to prioritize the traffic over the network. A WPS button allows for easy wireless security configuration.

This router provides VPN pass-through for IPSec and PPTP. It features a built-in SPI firewall to protect the network from intruders and Denial of Service (DoS) attacks.
 
 
 
 AR-7265WnA Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN throughput: 24 Mbps
 WAN throughput upstream: 1 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 UPnP: yes
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 300 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n (draft 2.0)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
 WiFi modes: Access point
 external antenna(s): 3
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 3 dBi
 Transmit Power: +16 dBm
 Receiver Sensitivity: -74 dBm
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: IP Address filtering, MAC Address filtering
 Device Management
 Default IP address: 192.168.2.1
 Default admin username: admin
 Default admin password: 1234
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
 Misc hardware info
 RAM: 16 Mb
 Flash Memory: 4 Mb
 Max clients: 253
 SNMP support: SNMP v.2
 NTP client: yes
 Links
 Product page: http://www.edimax.com/en/produce_detail....
 Datasheet: http://www.edimax.com/images/Image/datas...
 Manual: http://www.edimax.com/images/Image/manua...
 Quick Install Guide: http://www.edimax.com/images/Image/QIG/W...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About