The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

Edimax AR-7064Mg+

details: 4 Ports MIMO XR 802.11g/b Wireless ADSL2+ Router
hardware type: DSL Wireless Router
date added: 2010-06-06
updated: 2014-09-23
The AR-7064Mg+ is a wireless ADSL2+ router. It has four 10/100 Base-T Ethernet ports and provides WAN throughput of up to 24Mbps.

The integrated AP complies with IEEE 802.11b/g standards, providing wireless transmission speeds of up to 54Mbps. The router supports WEP and WPA/WPA2 wireless encryption and 802.1x authentication.

This router features a built-in SPI firewall to protect the network from Denial of Service (DoS) attacks.
 
 
 
 AR-7064Mg+ Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN throughput: 24 Mbps
 WAN throughput upstream: 2 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DNS proxy: yes
 Dynamic DNS client: yes
 UPnP: yes
 Transparent Bridging (IEEE 802.1d): yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11g+ (108 Mbps+)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
SSID Broadcast disable
 WiFi modes: Access point
 external antenna(s): 3
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 4 dBi
 Transmit Power: +15 dBm
 Receiver Sensitivity: -65 dBm
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: MAC Address filtering, packet filtering
 Device Management
 Default IP address: 192.168.2.1
 Default admin username: n/a
 Default admin password: admin
 Administration: Web-based (LAN)
Quick Setup Wizard
SSH
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Event log: yes
 Misc hardware info
 Chipset: PSB50505
 Flash Memory: 4 Mb
 NTP client: yes
 Links
 Product page: http://www.edimax.com/en/produce_detail....
 Datasheet: http://www.edimax.com/images/Image/datas...
 Manual: http://www.edimax.com/images/Image/manua...
 Quick Install Guide: http://www.edimax.com/images/Image/QIG/W...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About