The 3G-6408n supports both 3G/3.75G and cable/xDSL modems. With both a USB port and an Ethernet WAN port, you can easily share a 3G/3.75G or cable/xDSL connection with multiple devices. Users with both kinds of Internet services will enjoy the router's connection fail-over function, which allows the router to automatically switch to the cable/xDSL connection when 3G/3.75G Internet access is not available.
With the latest green WLAN technology, the 3G-6408n is able to dynamically adjust its power supply according to the level of activity. By supplying only the amount of power needed, this router allows for high networking performance while maintaining minimum power consumption.
| 3G-6408n Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
1 one USB port for 3G USB modem |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| USB port(s): |
1 for 3G USB modem |
| USB port type: | USB 2.0 |
| Auto-failover connection: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: | Access point |
| external antenna(s): | 2 |
| ext antenna(s) removable ?: |
 |
| Antenna gain: | 3 dBi |
| WMM (QoS): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.2.1 |
| Default admin username: | admin |
| Default admin password: | 1234 |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| RAM: | 32 Mb |
| Flash Memory: | 8 Mb |
| NTP client: |
|
| Links | |
| Product page: | http://www.edimax.com/en/produce_detail.... |
| Datasheet: | http://www.edimax.com/images/Image/datas... |
| Manual: | http://www.edimax.com/images/Image/manua... |
| Quick Install Guide: | http://www.edimax.com/images/Image/QIG/W... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|