is designed to connect to the Internet and to directly connect to your local area
network (LAN) via high-speed 10/100 Mbps Ethernet, or wireless LAN (WLAN).
The R-ADSL411N is compatible with the latest ADSL standards, including ADSL2 and ADSL2+, and supports up to 24Mbps downstream and 1.5Mbps upload speeds.
The DSL router supports wireless 802.11b/g/n (draft 2.0), as well as WEP, WPA, WPA2, and 802.1x security protocols. A WPS button allows for easy wireless security configuration.
| R-ADSL411N Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN throughput: |
24 Mbps |
| WAN throughput upstream: |
1 Mbps |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
1 for storage devices |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| QoS: |
|
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) RE-ADSL2 (G.992.3 Annex L) ADSL2+ (G.992.5) |
| PPPoE client: |
|
| PPPoA client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point |
| external antenna(s): | 2 |
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, date/time scheduling |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI SSH |
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| Links | |
| Product page: | http://www.dynamode.com/english/pages/pr... |
| Datasheet: | http://www.dynamode.com/english/pdf/prod... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
Humph - 2012-02-16 05:02
Please note that the default IP address for this router is actually 192.168.0.1
Anyone having problems loading webpages may need to adjust their MTU setting - this cannot be done with the version 1.0.0 firmware; you need to download and install the latest version of the firmware (version 1.0.2 at time of posting) from the following location: http://www.dynamode-drivers.com/index.php?option=com_content&view=article&id=161:r-adsl411n&catid=34:routers-adsl&Itemid=53 Hope this helps someone - it took me ages to figure it out, and my email to dynamode technical support was totally ignored.
Thank you for sharing this information !
|
|
|