The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

DrayTek Vigor 2920n

details: Dual WAN Wireless Router with 3G HSPA+ Support
hardware type: Multi-WAN Router
date added: 2010-11-03
updated: 2015-11-15
The Vigor2920n is a wireless Dual WAN broadband router with one 10/100Base-T WAN port, another 10/100/1000Base-T WAN port, four 10/100/1000Base-T LAN ports and one USB port, intended for printers or 3G USB modem connection. The router provides Load Balancing and Auto-failover capabilities.

The integrated access point complies with IEEE 802.11n standard, providing wireless transmission speeds of up to 300Mbps. It supports WMM (QoS) to prioritize the traffic over the network. A WPS button allows for easy wireless security configuration.

The Vigor 2920n supports VPN pass-through for IPSec, L2TP and PPTP, allowing you to establish up to 32 simultaneous IPSec VPN tunnels. It features a built-in SPI firewall to protect the network against Denial of Service (DoS) attacks.

The router can be easily configured via Web-based configuration utility or via Telnet/CLI.
 
 
 
 Vigor 2920n Features
 General
 Availability: currently available
 Street price: $335
 Warranty: 2 year(s)
 LAN / WAN Connectivity
 WAN throughput: 150 Mbps
 WAN ports: 1
one 10/100/1000Mbps WAN port, one USB port for 3G modem
 WAN port(s) type: 10/100 Base-TX (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: 10/100/1000 Gigabit Ethernet (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 1
for printers, storage devices, 3G USB modems
 USB port type: USB 2.0
 Auto-failover connection: yes
 Load Balancing: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 DNS proxy: yes
 Dynamic DNS client: yes
 QoS: yes
 ToS / DiffServ: yes
 UPnP: yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
 Wireless
 Maximum Wireless Speed: 300 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
 external antenna(s): 3
 ext antenna(s) removable ?: yes
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
 VPN Authentication: MD5 (128-bit), SHA1 (160-bit), IKE (IPSec) Key Management
 VPN Encryption: DES (56-bit), 3DES (168-bit), AES (128-bit)
 RADIUS support: yes
  IPSec
 IPSec passthrough: yes
 IPSec simultaneous tunnels: 32
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering, date/time scheduling
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
SSH
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Email alerts: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
ping, traceroute
 Misc hardware info
 SNMP support: SNMP v.2
 NTP client: yes
 Print Server: yes
 Links
 Product page: http://www.draytek.com/index.php?lang=en
 Datasheet: http://www.speedguide.net/images/hardwar...
 Manual: http://www.speedguide.net/images/hardwar...
 Quick Install Guide: http://www.speedguide.net/images/hardwar...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  User Reviews/Comments:
    rate:
   avg:
by JW - 2011-12-03 12:10
L2TP over IPSEC VPN connections are very unstable, in the best case the connection exist for a hour, but normally it breaks before.

Sometimes the 2920n goes in state where it reboots each time after the WAN connection is established. The only solution to get out of this loop, is to disconnect the WAN cable and do a complete factory reset.

The maximum VPN througput is only 15Mbits/s.
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About