The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

Digicom Michelangelo Wave Pro V 3G

details: 3G Wireless Mobile Router
hardware type: Travel Router
date added: 2011-03-02
updated: 2012-08-27
Michelangelo Wave Pro V 3G integrates all the features necessary for an efficient ADSL or UMTS Internet access with LAN protection and Wireless connectivity in a single device.

The 3G USB modem (UMTS/HSDPA/HSUPA) port can be used as an Auto-failover connection of the primary connection (ADSL or 3G).

As an alternative to Auto-failover mode, Michelangelo Wave PRO V 3G can use the UMTS network as primary link for mobile applications (rescue means of transport, totems, temporary posts, etc.) or preliminary installations in geographical areas not reached by the ADSL network where operators supply the UMTS connectivity as temporary network.

The VPN support (Virtual Private Network) offers secure local LAN access even to remote users (single Client or whole LANs) protected by data encryption, both via ADSL and UMTS.
 
 
 
 Michelangelo Wave Pro V 3G Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 WAN throughput: 7 Mbps
 WAN throughput upstream: 2 Mbps
 WAN ports: 1
one USB port for 3G USB modem
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 1
 USB port type: USB 2.0
 Auto-failover connection: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: yes
 ToS / DiffServ: yes
 UPnP: yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Wireless bridge (PtP)
 WDS compatible: yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
 VPN Authentication: IKE (IPSec) Key Management
 VPN Encryption: DES (56-bit), 3DES (168-bit), AES (128-bit)
  IPSec
 IPSec passthrough: yes
 IPSec simultaneous tunnels: 8
  L2TP
 L2TP server: yes
 L2TP client: yes
 L2TP passthrough: yes
  PPTP
 PPTP server: yes
 PPTP client: yes
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering, packet filtering
 Device Management
 Default IP address: 192.168.1.254
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Telnet / CLI
 Firmware upgradeable: yes
 Event log: yes
 Misc hardware info
 SNMP support: SNMP v.1, SNMP v.2
 NTP client: yes
 Links
 Product page: http://www.digicom.it/digisit/prodotti.n...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About