Equipped with two FXS ports (for analog phones), the router is able to make two VoIP calls at the same time. A FXO port is also available for emergency calls and for backup over PSTN in case the ADSL or VoIP service is unavailable.
Michelangelo VoIP 2 supports supplementary voip services like Call Hold, Caller ID and Call Diversion.
A 54Mbps Wireless Access Point with WPA-PSK, WPA2-PSK and WEP 64/128bit encryption is integrated for secure radio transmissions. The built-in Stateful Packet Inspection Firewall guarantees secure accesses and protects your PC from external attacks.
| Michelangelo VoIP 2 Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN throughput: |
24 Mbps |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| RJ-11 FXS VoIP phone ports: | 2 |
| RJ-11 FXO VoIP PSTN wall jack port: | 1 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) IGMP Multicast (RFC 1112) |
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) ADSL2+M (G.992.5 Annex M) |
| PPPoE client: |
|
| PPPoA client: |
|
| VoIP | |
| VoIP Protocols: |
SIP v2 (RFC 3261) T.38 (Fax over IP) |
| VoIP Audio Codecs: |
G.711 (PCM) G.723.1 G.726 G.729 (a/b) |
| VoIP Voice Features: |
Echo Cancellation (G.165/G.168) Caller ID Voice Activity Detection (VAD) Comfort Noise Generator (CNG) |
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: | Access point |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| WDS compatible: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering |
| Device Management | |
| Default IP address: | 192.168.1.254 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI |
| Firmware upgradeable: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| NTP client: |
|
| Links | |
| Product page: | http://www.digicom.it/digisit/prodotti.n... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|