speedguide.net  

D-Link DSL-526B

details: ADSL2+ Ethernet/USB Combo Modem Router
hardware type: DSL Router
date added: 2010-02-12
updated: 2015-11-08
The DSL-526B is an ADSL2/2+ router with one RJ-11 WAN port, one 10/100Mbps LAN port and a single USB 1.1 port. It provides WAN throughput of up to 24Mbps.

This router provides VPN pass-through for IPSec, L2TP and PPTP. It features a built-in SPI firewall to protect the network against intruders and Denial of Service (DoS) attacks.

The router can be easily configured via Web-based configuration utility or via Telnet/CLI.

Intended for the Australian/European markets.
 
 
 
 DSL-526B Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN throughput: 24 Mbps
 WAN throughput upstream: 2 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 1
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 1
client PCs
 USB port type: USB 1.1
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: yes
 ToS / DiffServ: yes
 UPnP: yes
 Transparent Bridging (IEEE 802.1d): yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
 PPPoE client: yes
 PPPoA client: yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Intrusion Detection System (IDS): yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering, packet filtering
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Telnet / CLI
SSH
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
 Misc hardware info
 SNMP support: SNMP v.1, SNMP v.2
 NTP client: yes
 Links
 Product page: http://www.dlink.com.au/home-solutions/d...
 Datasheet: http://files.dlink.com.au/Products/DSL-5...
 Manual: ftp://files.dlink.com.au/products/DSL-52...
 Quick Install Guide: ftp://files.dlink.com.au/products/DSL-52...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  User Reviews/Comments:
    rate:
   avg:
by anonymous - 2011-03-25 23:34
Doesn't look like it supports Dynamic DNS (from looking at the user manual)
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About