The DAP-1150 features one 10/100Base-T LAN port. It is WDS compatible and supports WMM (QoS) to prioritize the traffic over the network. A WPS button allows for easy wireless security configuration.
This AP can operate in Wireless Client and Repeater modes.
| DAP-1150 Features | |
| General | |
| Availability: | discontinued |
| Street price: |
$53 |
| Warranty: | 3 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP relay: |
|
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Repeater mode |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna gain: | 2 dBi |
| Receiver Sensitivity: | -65 dBm |
| Default SSID: | dlink |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Default IP address: | 192.168.0.50 |
| Alternate Admin URL: | http://dlinkap |
| Default admin username: | admin |
| Default admin password: | (blank) |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Links | |
| Product page: | http://www.dlink.com.au/products/?pid=73... |
| Datasheet: | ftp://files.dlink.com.au/Products/DAP-11... |
| Manual: | ftp://files.dlink.com.au/Products/DAP-11... |
| Quick Install Guide: | ftp://files.dlink.com.au/Products/DAP-11... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|