The integrated access point complies with IEEE 802.11g, providing wireless transmission speeds of up to 54Mbps. It provides WEP and WPA/WPA2 wireless encryption and uses WMM (QoS) to prioritize the traffic over the network. A WPS button allows for easy wireless security configuration.
This router provides VPN pass-through for IPSec, L2TP and PPTP. A built-in SPI firewall protects the network against hackers and Denial of Service (DoS) attacks.
| CT-5369 Features | |
| General | |
| Availability: | discontinued |
| Warranty: | 2 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| UPnP: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) Spanning Tree Protocol (STP) VLAN tagging (802.1q) IGMP Multicast (RFC 1112) |
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication |
| WiFi modes: | Access point |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | IP Address filtering, MAC Address filtering, packet filtering |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | root |
| Default admin password: | 12345 |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI SSH TFTP (RFC 1350) |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| NTP client: |
|
| Links | |
| Product page: | http://www.comtrend.com/cgi-bin/na/db-se... |
| Datasheet: | http://www.comtrend.com/na/dbase/upload/... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|