| Broadband Hardware |
Built specifically for small businesses, the Cisco WAP321 offers selectable-band 802.11n wireless technology to deliver high throughput and extended range throughout your office. Advanced quality-of-service (QoS) features let you prioritize traffic to support bandwidth-sensitive applications. It supports multiple Service Set Identifiers (SSIDs) to enable you to segregate traffic for different departments, users, and communication devices. The Cisco WAP321 is simple to set up and use, with intuitive wizard-based configuration to get you up and running in minutes. Power over Ethernet (PoE) support makes the device easy to install without the need for separate power plugs or expensive new wiring. To enhance reliability and safeguard sensitive business information data, the Cisco WAP321 supports Wi-Fi Protected Access (WPA2), encoding all your wireless transmissions with powerful encryption. 802.1X RADIUS authentication helps keep unauthorized users out. |
click image to enlarge |
||||||||
|
|
|||||||||
| WAP321 Features | |
| General | |
| Availability: | currently available |
| List price: | $310 |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100/1000 Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| Load Balancing: |
|
| Router | |
| DHCP client: |
|
| Routing Protocols: |
Spanning Tree Protocol (STP) VLAN tagging (802.1q) |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps |
| WiFi standards supported: |
802.11b (11 Mbps) 802.11g (54 Mbps) 802.11n |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication SSID Broadcast disable |
| WiFi modes: |
Access point Wireless bridge (PtP) |
| internal antenna(s): | 1 |
| Antenna gain: | 2 dBi |
| Transmit Power: | +13 dBm |
| Receiver Sensitivity: | -71 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WMM-PS (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Default IP address: | 192.168.1.245 |
| Default admin username: | cisco |
| Default admin password: | cisco |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard Telnet / CLI SSH |
| Firmware upgradeable: |
|
| Email alerts: |
|
| Event log: |
|
| Diagnostic functions: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.3 |
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://www.cisco.com/en/US/products/ps12... |
| Datasheet: | http://www.cisco.com/en/US/prod/collater... |
| Manual: | http://www.cisco.com/en/US/docs/wireless... |
| Quick Install Guide: | http://www.cisco.com/en/US/docs/wireless... |
| Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please |
|
No user reviews/comments yet
rate:
avg:
|
|
|