This modem is designed to meet DOCSIS 2.0 specifications, as well as offering backward compatibility for operation in DOCSIS 1.1, and 1.0 networks.
The DPC2100 also features WebWizard, a browser-based user interface. WebWizard is a tool that facilitates installation and troubleshooting, and eliminates the need to load set-up software on the customer premises equipment (CPE).
| DPC2100 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN throughput: |
42 Mbps |
| WAN ports: |
1 |
| WAN port(s) type: | Coax F-connector |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
1 for client PCs |
| USB port type: | USB 1.1 |
| Cable Modem | |
| DOCSIS compliance: |
DOCSIS 1.0 DOCSIS 1.1 DOCSIS 2.0 |
| Device Management | |
| Default IP address: | 192.168.0.1 |
| Default admin username: | (blank) |
| Default admin password: | (blank) |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.1, SNMP v.2, SNMP v.3 |
| Links | |
| Datasheet: | http://www.cisco.com/en/US/prod/collater... |
| Manual: | http://www.cisco.com/web/consumer/suppor... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
Philip - 2012-06-02 10:57
Reportedly, users can visit http://192.168.100.1/_aslvl.asp and change the access level from 1 to 2 (password: W2402) to access the modem signal and logs diagnostic pages.
Access level may revert back to level 1 because it gets updated from the headend. |
|
|