The Broadband Guide
SG
search advanced

Cisco 876W

details: Wireless-G ADSL2+ Router
hardware type: DSL Wireless Router
date added: 2009-09-22
updated: 2020-04-08
The Cisco 876W is a wireless ADSL2+ router with a single RJ-11 WAN port and a four-port 10/100Base-T Ethernet switch with the ability to designate a port as network DMZ. The router has an ISDN S/T port for out-of-band management. It can be connected to an optional external PoE adapter for IP phones or external wireless access points.

The integrated access point supports WMM (QoS) and multiple SSIDs. It supports WEP, WPA/WPA2 wireless encryption and 802.1x authentication.

This router supports VPN pass-through for IPSec, L2TP and PPTP, allowing you to establish up to ten simultaneous VPN tunnels. A built-in SPI firewall protects the network against unauthorized access.
 
 
 
 876W Features
 General
 Availability: discontinued
 Warranty: 1 year(s)
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Serial port: yes
 Router
 NAT routing: yes
 Multihomed: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
Spanning Tree Protocol (STP)
VLAN tagging (802.1q)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
 WiFi modes: Access point
 external antenna(s): 2
 ext antenna(s) removable ?: yes
 Antenna connector: RP-TNC (Reverse TNC)
 Antenna gain: 2 dBi
 Transmit Power: +17 dBm
 Receiver Sensitivity: -73 dBm
 Multiple SSID: yes
 WMM (QoS): yes
 VPN
 VPN Encryption: 3DES (168-bit), AES (128-bit)
  IPSec
 IPSec passthrough: yes
 IPSec simultaneous tunnels: 10
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 Security log: yes
 Device Management
 Default admin username: cisco
 Default admin password: cisco
 Administration: Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
Windows application
 Firmware upgradeable: yes
 Event log: yes
 Misc hardware info
 RAM: 128 Mb
 SNMP support: SNMP v.3
 Links
 Product page: http://www.cisco.com/en/US/products/ps62...
 Datasheet: http://www.cisco.com/en/US/prod/collater...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About