The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

Bountiful BWRG500

details: 802.11b/g Wireless Router
hardware type: Wireless Router
date added: 2010-05-02
updated: 2015-10-26
The BWRG500 is a wireless router with one 10/100Base-T WAN port and four 10/100Base-T LAN ports.

The integrated access point complies with IEEE 802.11b/g, providing wireless transmission speeds of up to 54Mbps. It can operate in AP, Wireless Bridge and Repeater modes. The BWRG500 uses WMM (QoS) to prioritize the traffic over the network and uses WEP and WPA/WPA2 wireless encryption.

This router supports VPN pass-through for IPSec and PPTP. It features a built-in firewall to protect the network against hackers and Denial of Service (DoS) attacks.
 
 
 
 BWRG500 Features
 General
 Availability: currently available
 Street price: $165
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: 10/100 Base-TX (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DNS proxy: yes
 Dynamic DNS client: yes
 QoS: yes
 MAC Address clone: yes
 Routing Protocols: VLAN tagging (802.1q)
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
SSID Broadcast disable
 WiFi modes: Access point
Wireless bridge (PtP)
Multipoint bridge (PtMP)
Repeater mode
 external antenna(s): 1
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 3 dBi
 Transmit Power: +26 dBm
 Receiver Sensitivity: -73 dBm
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 DoS / DDoS protection: yes
 Intrusion Detection System (IDS): yes
 Filtering: IP Address filtering, MAC Address filtering, packet filtering
 Device Management
 Default IP address: 192.168.0.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Telnet / CLI
 Firmware upgradeable: yes
 Misc hardware info
 SNMP support: SNMP v.2
 NTP client: yes
 Links
 Quick Install Guide: http://www.speedguide.net/images/hardwar...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About