The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

BaudTec RW243R1

details: 802.11b/g WLAN ADSL2+ Router
hardware type: DSL Wireless Router
date added: 2011-01-28
updated: 2015-10-18
The RW243R1 is a high-speed ADSL2+ Ethernet router that is specifically designed to connect to the Internet and to directly connect to your local area network (LAN) via high-speed 10/100 Mbps Ethernet and Wireless 802.11b/g.

The ADSL2+ modem is compatible with the latest ADSL standards, including ADSL2 and ADSL2+, and supports up to 24 Mbps downstream and 1.5 Mbps upstream to deliver true broadband speed and throughput.

This router has a built-in SPI firewall to protect the network against hackers and Denial of Service (DoS) attacks.
 
 
 
 RW243R1 Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 WAN throughput: 24 Mbps
 WAN throughput upstream: 1 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 1
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
Spanning Tree Protocol (STP)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
 WiFi modes: Access point
 external antenna(s): 1
 Transmit Power: +14 dBm
 Receiver Sensitivity: -68 dBm
 WPS (Wi-Fi Protected Setup): yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: IP Address filtering
 Device Management
 Default admin username: admin
 Default admin password: 1234
 Administration: Web-based (LAN)
Telnet / CLI
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Diagnostic functions: yes
 Misc hardware info
 SNMP support: SNMP v.1, SNMP v.2
 Links
 Product page: http://www.baudtec.com.tw/products.htm

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About