speedguide.net 

Aztech DSL605EW

details: ADSL2+ Wireless 4-Port Router
hardware type: DSL Wireless Router
date added: 2009-11-18
updated: 2012-09-12
The DSL605EW is an ADSL1/2/2+ wireless router with one RJ-11 WAN port and four 10/100Mbps LAN ports. It supports NAT routing, DMZ and UPnP.

The integrated access point complies with the IEEE 802.11b/g standards. Using the "G++" technology, it provides wireless transmission speeds of up to 125Mbps. It supports Multiple SSIDs and uses WEP and WPA/WPA2 wireless encryption.

This router supports VPN pass-through for IPSec, L2TP and PPTP. It features a built-in SPI firewall to protect the network against hackers and Denial of Service (DoS) attacks.
 
 

» Forums search for Aztech DSL605EW
 
 DSL605EW Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: yes
 ToS / DiffServ: yes
 UPnP: yes
 Transparent Bridging (IEEE 802.1d): yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 108 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11g+ (108 Mbps+)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
 WiFi modes: Access point
 external antenna(s): 1
 ext antenna(s) removable ?: no
 Antenna gain: 3 dBi
 Transmit Power: +20 dBm
 Multiple SSID: yes
 WDS compatible: yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, MAC Address filtering, packet filtering
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Telnet / CLI
SSH
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
ping
 Misc hardware info
 Chipset: INFINEON 7200 + 1350
 RAM: 16 Mb
 Flash Memory: 4 Mb
 SNMP support: SNMP v.1, SNMP v.2
 NTP client: yes
 Links
 Datasheet: ftp://ftp.aztech.com/aztech/Brochure/OEM...
 Manual: ftp://ftp.aztech.com/support/malaysia/AD...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  User Reviews/Comments:
    rate:
   avg:
by sagun - 2011-01-05 06:15
HI
I HAVE AZTECH DSL605EW MODAM SOMEBODY KNOWS MY WIFI PASSWARD SO I WANT CHANGE MY PASSWARD PLEASE HELP ME HOW CAN POSIBILE TO CHANGEWERELESS PASSWARD LET ME KNOW
THANKS
by anonymous - 2011-02-01 04:53
If you've forgotten your password, there is an option to reset the entire router configuration. Look for a small small push button that you can push with a pin/small needle. It will be somewhere on the back side or near the power cord.
I hope this helps.
by green tower - 2011-03-21 09:37
i have dsl 605ew but no have user name&password so iwant now new user name &password and i all redy may be 10 time for setep page but setup page not open why i dont no.
by zetaphiomega - 2011-03-27 08:47
i have encounter a AZTECH DSL650EW it cannot be reset. i press the reset button it restarted by the IP address won't back to the default..

please somebody would like to help me..
this is my first encounter a problem like this..
by Philip - 2011-03-28 16:49
Many routers need to have the reset button pressed for 10-30 seconds when the router is being powered up (plugged in) to be reset to the factory default. It may be indicated by flashing leds after the 10-30 seconds interval...

Just pressing the reset button will reboot the unit without resetting it to the factory defaults.
by anonymous - 2012-01-18 06:02
HI I USING AZTEK ROUTER .HOW CAN I GET STRON SECURITY MY WIRLESS CONNECTION
by mohsin - 2012-03-25 11:11
DSL605EW Wireless configuration - Aztech

i have this roter can any body tell me that how long its wi fi range

tell me in meters
by Baskar - 2012-09-13 00:00
I need wire connection only and disconnect the wireless using with same modem.

Please advise
by anonymous - 2012-09-23 12:06
is there a way to block a certain mac address from accessing the wifi on this modem ?
by piyal - 2013-10-20 07:45
how to change dns on aztech dsl605ew...plz help me
by ozey - 2014-04-23 07:49
Why my new hp htc one 4G cannot connect to my DSL605..although it can find the WIFI.
by shoaib - 2014-09-14 06:00
I am unable to access yahoomail on my aztech dsl 605ew modem.i am using it in india.i have purchased it in dubai.help me to configure my modem so that i can configure yahoomail too
print discuss top