| MR-101N Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN throughput: |
42 Mbps
|
| WAN ports: |
1
1 USB 2.0 port for 3G USB modem |
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
|
| USB port(s): |
1
for 3G USB modem |
| USB port type: |
USB 2.0
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| MAC Address clone: |
|
| VoIP
|
| VoIP Protocols: |
SIP v2 (RFC 3261)
|
| Wireless
|
| Maximum Wireless Speed: |
150 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (draft)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
SSID Broadcast disable
|
| WiFi modes: |
Access point
Repeater mode
|
| Multiple SSID: |
|
| WDS compatible: |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
Domain/URL blocking
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Quick Setup Wizard
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Diagnostic functions: |
ping, traceroute |
| Misc hardware info
|
| NTP client: |
|
| Links
|
| Product page: |
http://www.aximcom.com/en/ |
