speedguide.net  

Arris SBR-AC1900P

details: SURFboard Wi-Fi Router with RipCurrent G.hn Technology
hardware type: Wireless Router
date added: 2016-05-15
updated: 2017-01-29
The SURFboard SBR-AC1900P Wi-Fi Router provides four Ethernet connections for use as the hub of your home/office Local Area Network (LAN). It also provides 802.11a/b/g/n/ac 2.4/5 Ghz dual-band concurrent wireless connectivity for enhanced mobility and versatility.

The SBR-AC1900P uses the power cable connected to the Wi-Fi Router to connect to the power lines that already exist in your home. RipCurrent is based on G.hn Power Line Communication (PLC), which is an ITU Specification managed by the HomeGrid Forum.

This technology allows the SBR-AC1900P to distribute all data to each of the AC power outlets in the home. With a corresponding G.hn Extender, the Wi-Fi or wired network can be extended to any room, including basements, garages, or far reaching bedrooms.

The router supports up to 15 connected power line extenders.

A USB 3.0 port and a USB 2.0 port allow for data and media storage or transfer and print sharing.
 
 
 
 SBR-AC1900P Features
 General
 Availability: currently available
 Street price: $199
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: Gigabit Ethernet (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: Gigabit Ethernet (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 2
one of the USB ports is USB 3.0 (for printers, storage devices and device charging)
 USB port type: USB 2.0
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 UPnP: yes
 Wireless
 Maximum Wireless Speed: 1900 Mbps (Wi-Fi 5)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
802.11ac (Wi-Fi 5)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
 internal antenna(s): 6
 Multiple SSID: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 Beamforming: yes
 Dual Band (2.4GHz/5GHz): yes
 Simultaneous Dual Band (2.4GHz/5GHz): yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Device Management
 Alternate Admin URL: http://mysurfboard.local
 Default admin username: admin
 Default admin password: password
 Administration: Web-based (LAN)
Remote configuration (WAN)
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Misc hardware info
 IPv6 support: yes
 Print Server: yes
 Links
 Product page: http://www.surfboard.com/products/sbr-ac...
 Datasheet: http://speedguide.net/images/hardware/ar...
 Manual: http://speedguide.net/images/hardware/ar...
 Quick Install Guide: http://speedguide.net/images/hardware/ar...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About