The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

Arris SBR-AC1200P

details: AC1200 Wireless Router with RipCurrent G.hn Technology
hardware type: Wireless Router
date added: 2016-04-25
The SURFboard SBR-AC1200P Wi-Fi Router with RipCurrent technology is part of a portfolio of home networking products designed to eliminate dead-zones, and blanket your home with Wi-Fi.

The SURFboard SBR-AC1200P Wi-Fi Router provides four Ethernet connections for use as the hub of your home/office Local Area Network (LAN). It also provides 802.11a/b/g/n/ac wireless connectivity for enhanced mobility and versatility.

The SBR-AC1200P uses the power cable connected to the Wi-Fi Router to connect to the power lines that already exist in your home. RipCurrent is based on G.hn Power Line Communication (PLC), which is an ITU Specification managed by the HomeGrid Forum.

This technology allows the SBR-AC1200P to distribute all data to each of the AC power outlets in the home. With a corresponding G.hn Extender, the Wi-Fi or wired network can be extended to any room, including basements, garages, or far reaching bedrooms.

The router supports up to 15 connected power line extenders.
 
 
 
 SBR-AC1200P Features
 General
 Availability: currently available
 List price: $119
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: 10/100/1000 Gigabit Ethernet (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: 10/100/1000 Gigabit Ethernet (RJ-45)
 LAN ports auto cross-over: yes
 Powerline Networking: HomePlug GreenPhy (10Mbps)
 USB port(s): 2
for printers and storage devices
 USB port type: USB 2.0
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 Wireless
 Maximum Wireless Speed: 1200 Mbps (867ac+300n)
 WiFi standards supported: 802.11a (54 Mbps)
802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n
802.11ac
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
 internal antenna(s): 4
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 Dual Band (2.4GHz/5GHz): yes
 Simultaneous Dual Band (2.4GHz/5GHz): yes
 Firewall
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering
 Device Management
 Alternate Admin URL: http://mysurfboard.local
 Default admin username: admin
 Default admin password: password
 Administration: Web-based (LAN)
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Misc hardware info
 IPv6 support: yes
 Print Server: yes
 Links
 Product page: http://www.surfboard.com/products/sbr-ac...
 Manual: http://www.speedguide.net/images/hardwar...
 Quick Install Guide: http://www.speedguide.net/images/hardwar...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About