This AP complies with IEEE 802.11b/g standards, providing wireless transmission speeds of up to 54Mbps. It is WDS compatible and uses WMM (QoS) to prioritize the traffic over the network.
This device can act as a DHCP client. It can be easily configured via Web-based configuration utility or via SNMP.
| EAP100 Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 2 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Serial port: |
DB-9 |
| Router | |
| DHCP client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| Routing Protocols: | VLAN tagging (802.1q) |
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: |
Access point Wireless bridge (PtP) Repeater mode |
| external antenna(s): | 2 |
| ext antenna(s) removable ?: |
|
| Antenna gain: | 5 dBi |
| Transmit Power: | +16 dBm |
| Receiver Sensitivity: | -68 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| Chipset: | Atheros |
| SNMP support: | SNMP v.1, SNMP v.2 |
| Power over Ethernet (PoE): |
|
| Notes: | One serial console port for management. |
| Links | |
| Datasheet: | http://www.speedguide.net/images/hardwar... |
| Quick Install Guide: | http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|