Page 1 of 1
OCin my 1ghz duron
Posted: Mon Sep 02, 2002 3:56 pm
by C-S wanna be
hey ive gotten my duron up to 1.2 but it seems a little unstable. what are some settings that i can put to it using a fsb multiplier called fuzzy logic 4. and what voltage settings should i have?
Posted: Mon Sep 02, 2002 5:02 pm
by cy
did you try to turn your voltage up a little? What FSB u ran the duron at?
Posted: Mon Sep 02, 2002 5:26 pm
by LT-73
Yeah, you'll have to raise the voltage on the cpu to get it stable plus maybe raise the vdimm on the memory.
Also is the Duron unlocked?
Posted: Tue Sep 03, 2002 10:55 am
by C-S wanna be
i think i had fsb to 122 and then it locked up. i had voltage to 1.75 or what ever it is. yeah shorted out all L1's so its unlocked.
Posted: Wed Sep 04, 2002 2:27 am
by LT-73
Ok, try to raise the voltage up to 1.80 and boot up. Hope you've got good cooling cuz when you raise the voltage, you also raise the heat.
Once it's up and running at that voltage, then try to raise fsb.
Posted: Wed Sep 04, 2002 4:54 am
by onetrueday
with proper cooling, I'd raise the voltage to the max. as long as you have some nice cooling, you should reach 1.2 fine. I had my duron800 to 1.05 fully stable, but I was running at 1.85 voltage and had nice cooling.
Posted: Wed Sep 04, 2002 8:14 am
by cy
or did you try to raise the multipler? but yep, raise the voltage to 1.85V first
Posted: Wed Sep 04, 2002 1:26 pm
by C-S wanna be
Yeah well i have a Volcano 7 on the Duron 1000 and its rated for a little more than 1 ghz so i think i should be fine there.