SG Broadband Community

My ISP is @shaw and i'm using winME so i need help with setting on the following. See screenshot here. Thanks.

screenshot here

For Shaw & ME use the following settings:

BcastNameQueryCount - 1
BcastQueryTimeout - 100
BSDUrgent - 1
CacheTimeout - 600000
DefaultRecvWindow - 64240
DefaultTTL - 64
EnableDNS - 0
GlobalMaxTcpWindoSize - 64240
KeepAliveInterval - 500
KeepAliveTime - 14400000
Lanabase - 0
LocalCopyMade - 1
MaxConnections - 64
MaxConnectRetries - 5
MaxDataRetries - 64
NameTableSize - 255
NameSrvQueryTimeout - 100
PMTUBlackHoleDetect - 0
PMTUDiscovery - 1
RoutingBufSize - 146432
RoutingPackets - 100
SackOpts - 1
SessionKeepAlive - 7200
SessionTableSize - 255
Size/Small/Medium/Large - 3
Tcp1323Opts - 0
TcpTimedWaitDelay - 30
MaxDupAcks - 2
DefaultTOS - 92
IGMPLevel - 2
MaxConnectionsPer1_0Server - 20
MaxConnectionsPerServer - 10

VERY IMPORTANT TO DO THE FOLLOWING

1. Under your Configuration tab for your Network settings make sure you have only the needed protocols.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. Make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot, anything checked in red is spyware and safe to remove.

7. Make sure you do the faster web page tweak in my Help & Tips link.

I'd like to say that the minimum of SessionKeepAlive is 60000.

Originally posted by mnosteele52
For Shaw & ME use the following settings:

BcastNameQueryCount - 1
BcastQueryTimeout - 100
BSDUrgent - 1
CacheTimeout - 600000
DefaultRecvWindow - 64240
DefaultTTL - 64
EnableDNS - 0
GlobalMaxTcpWindoSize - 64240
KeepAliveInterval - 500
KeepAliveTime - 14400000
Lanabase - 0
LocalCopyMade - 1
MaxConnections - 64
MaxConnectRetries - 5
MaxDataRetries - 64
NameTableSize - 255
NameSrvQueryTimeout - 100
PMTUBlackHoleDetect - 0
PMTUDiscovery - 1
RoutingBufSize - 146432
RoutingPackets - 100
SackOpts - 1
SessionKeepAlive - 7200
SessionTableSize - 255
Size/Small/Medium/Large - 3
Tcp1323Opts - 0
TcpTimedWaitDelay - 30
MaxDupAcks - 2
DefaultTOS - 92
IGMPLevel - 2
MaxConnectionsPer1_0Server - 20
MaxConnectionsPerServer - 10

VERY IMPORTANT TO DO THE FOLLOWING

1. Under your Configuration tab for your Network settings make sure you have only the needed protocols.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. Make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot, anything checked in red is spyware and safe to remove.

7. Make sure you do the faster web page tweak in my Help & Tips link.

SessionKeepAlive - Specifies how often to send session keepalive packets on active sessions.

Value Type: String Value

Default: 3600 seconds