OCin my 1ghz duron

C-S wanna be · Post by **C-S wanna be** » Mon Sep 02, 2002 3:56 pm

hey ive gotten my duron up to 1.2 but it seems a little unstable. what are some settings that i can put to it using a fsb multiplier called fuzzy logic 4. and what voltage settings should i have?

cy · Post by cy » Mon Sep 02, 2002 5:02 pm

did you try to turn your voltage up a little? What FSB u ran the duron at?

LT-73 · Post by **LT-73** » Mon Sep 02, 2002 5:26 pm

Yeah, you'll have to raise the voltage on the cpu to get it stable plus maybe raise the vdimm on the memory.

Also is the Duron unlocked?

C-S wanna be · Post by **C-S wanna be** » Tue Sep 03, 2002 10:55 am

i think i had fsb to 122 and then it locked up. i had voltage to 1.75 or what ever it is. yeah shorted out all L1's so its unlocked.

LT-73 · Post by **LT-73** » Wed Sep 04, 2002 2:27 am

Ok, try to raise the voltage up to 1.80 and boot up. Hope you've got good cooling cuz when you raise the voltage, you also raise the heat.

Once it's up and running at that voltage, then try to raise fsb.

onetrueday · Post by **onetrueday** » Wed Sep 04, 2002 4:54 am

with proper cooling, I'd raise the voltage to the max. as long as you have some nice cooling, you should reach 1.2 fine. I had my duron800 to 1.05 fully stable, but I was running at 1.85 voltage and had nice cooling.

cy · Post by cy » Wed Sep 04, 2002 8:14 am

or did you try to raise the multipler? but yep, raise the voltage to 1.85V first

C-S wanna be · Post by **C-S wanna be** » Wed Sep 04, 2002 1:26 pm

Yeah well i have a Volcano 7 on the Duron 1000 and its rated for a little more than 1 ghz so i think i should be fine there.