The Broadband Guide
SG
search advanced
 search
FAQs Categories:

How do USB devices draw more than 0.5 Amps without damaging USB ports ?

The USB power specs calls for maximum of 500mA=0.5 Amps, or 2.5 Watts at 5 Volts. This used to work for most low-power devices until the rise of bigger and brighter screens and really power-hungry tablets and spartphones.

Device manufacturers have developed a couple of workarounds to determine whether their device is connected to a charger, computer, or an unknown source. This is necessary to avoid pulling more than 0.5 Amps from a data port on a computer/laptop, which risks damaging the power source. Most devices only draw over 0.5 Amps if they determine that they are connected to a dedicated charger.

This is accomplished using two common methods. The first, and most common method for all non-Apple devices is to simply short the two data pins (pin2 and pin3) together in the charger. Since the data pins wouldn't be shorted in a computer, or any USB data port, the device can assume it is connected to a charger, and it is safe to draw over 0.5A.

The second approach, used by Apple does not fully short the data pins, rather applying different voltages to the Data(-) and Data(+) pins, to indicate to the device exactly how much power it can draw. Below is a table of known D+/D- voltages and the exact power that they can draw:

current: pin2(D-) / pin3(D+) 
2.5A: 2.75V / 2.75V (IPad 4 12Watt)
2.0A: 2.0V / 2.75V (old Iphone 3GS)
900mA: 2.75V / 2.0V (charges IPhones/IPads consistently accross all models)
500mA: 2.5V / 2.5V (?)
not charging: 0V / 0V (?)
Using higher current draw than the power source can safely supply is a fire hazard!

The standard USB pinout is as follows:
pin1 (red)    +5VDC (VCC)
pin2 (white) Data(-), D-
pin3 (green) Data(+), D+
pin4 (black) Ground, 0V


Notes:
2.75VDC can be achieved by connecting a 10KOhm resistor to +5V (pin1, red)
2.00VDC can be achieved by connecting a 10KOhm resistor to Ground (pin4, black)
USB specs and chargers allow for 0.25V variation, i.e. VCC from 4.75 to 5.25V


  User Reviews/Comments:
    rate:
   avg:
by anonymous - 2014-03-21 11:58
USB ports are supposed to be current limited to 500mA, but most cheaper motherboards use resetable thermal fuses, or regular fuses, rated at a couple Amps.
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About